Front Fork Spring 9.2 N/mm – 740 mm Dal Soggio

The Dal Soggio 1C.MOLLA-9.2-N/MM Front Fork Spring is a replacement or setup spring intended for compatible motorcycle front suspension systems.

This spring features a specified spring rate of 9.2 N/mm and an overall length of 740 mm, allowing it to be selected where this exact combination of rate and dimensions is required.

Fork spring rate is a key parameter in suspension setup because it influences how the front end supports the motorcycle and rider, reacts under braking, and uses available suspension travel.

A 9.2 N/mm spring provides a defined resistance to compression and should be selected according to the suspension platform, rider weight, motorcycle setup, riding discipline, and desired chassis balance.

The 740 mm length is an equally important fitment parameter and should be matched precisely to the corresponding fork or cartridge configuration.

Because no verified public Dal Soggio documentation was found specifying the exact fork model, material, wire diameter, or motorcycle compatibility for SKU 1C.MOLLA-9.2-N/MM, installation should only be carried out where this spring rate and length are explicitly required.

Key Features

• Dal Soggio front fork spring with a specified 9.2 N/mm spring rate
• 740 mm overall length for applications requiring this exact spring dimension
• Helps support correct front suspension sag, chassis balance, and use of available fork travel
• Suitable for suspension setup, servicing, tuning, or replacement of the corresponding fork spring
• Designed for applications specifically requiring Dal Soggio SKU 1C.MOLLA-9.2-N/MM