Dal Soggio SPHERE 3.0 WP 48 XACT CC Enduro Cartridge Kit 2024-2027

The Dal Soggio SPHERE 3.0 WP 48 XACT CC Enduro Cartridge Kit is a high-performance suspension upgrade developed specifically for the latest-generation WP 48 XACT Closed Cartridge Enduro fork platform used on compatible KTM and Husqvarna motorcycles from 2024 through 2027.

Dal Soggio officially identifies SKU 1P.SPH.XACT-CCEN3.0 as Sphere 3.0 – WP 48 XACT CC 2024-2027 EN, configured specifically for Enduro applications.

SPHERE 3.0 replaces the original internal damping system with Dal Soggio Race’s sealed and pressurized hydraulic cartridge, developed through extensive dyno and track testing to improve fork sensitivity, precision, hydraulic control, and rider feedback.

One of the most important improvements is the redesigned bladder, featuring a thinner yet stronger construction. This allows the cartridge to react more sensitively and provides greater precision during hydraulic bleeding.

The redesigned compression base valve features separate High-Speed Compression and Low-Speed Compression settings. Each damping range can therefore be adjusted independently, allowing the fork to be tuned more precisely according to terrain, rider weight, speed, riding style, and competition requirements.

SPHERE 3.0 also introduces a larger 36 mm compression piston, replacing the previous 28 mm configuration. The larger piston is designed to significantly improve the linearity of the fork’s hydraulic response throughout the suspension stroke.

Another key development is Dal Soggio’s Direct Flow Technology. The compression piston receives oil directly rather than through the previous Z-shaped internal passages, reducing unnecessary flow restriction and hydraulic stress inside the cartridge.

This specific WP XACT CC version also benefits from Dal Soggio’s Quick Install System. On compatible WP XACT forks from 2024 onward, the system allows installation of the SPHERE kit without removing the inner fork tube from the axle lug, simplifying the cartridge installation procedure.

For Enduro use, this combination is designed to provide increased front-wheel sensitivity over roots, rocks, ruts, braking bumps, and low-grip terrain while retaining sufficient hydraulic support during harder impacts, fast special tests, and aggressive riding.

Dal Soggio specifies CUBE Fork Oil 5W for use inside the SPHERE hydraulic cartridge system.

Key Features

• Sealed and pressurized SPHERE 3.0 hydraulic cartridge developed for WP 48 XACT Closed Cartridge Enduro forks
• Quick Install System allows installation on compatible WP XACT forks without removing the inner tube from the axle lug
• Separate High-Speed and Low-Speed Compression settings allow independent damping adjustment
• 36 mm compression piston improves hydraulic linearity compared with the previous 28 mm SPHERE design
• Direct Flow Technology delivers oil directly to the compression piston to reduce internal restriction and cartridge stress

Technical Specifications

Specification	Details
Manufacturer	Dal Soggio Race
Part Number / SKU	1P.SPH.XACT-CCEN3.0
Product Name	SPHERE 3.0 WP 48 XACT CC 2024-2027 EN
Product Type	Hydraulic Fork Cartridge Kit
Series	SPHERE 3.0
Fork Platform	WP 48 XACT Closed Cartridge
Discipline	Enduro
Motorcycle Brands	KTM / Husqvarna
Compatibility Years	2024-2027
Cartridge Type	Sealed and Pressurized Hydraulic Cartridge
Compression Piston Diameter	36 mm
Previous Piston Diameter	28 mm
Compression Adjustment	Separate High-Speed and Low-Speed Compression
Bladder	New thinner and stronger design
Hydraulic Technology	Direct Flow Technology
Installation System	Quick Install
Inner Tube Removal from Axle Lug	Not required on compatible WP XACT 2024+ applications
Specified Oil	Dal Soggio CUBE Fork Oil 5W
Installation Type	Internal Fork Cartridge Replacement / Upgrade
Professional Installation	Recommended

Application & Compatibility

The 1P.SPH.XACT-CCEN3.0 SPHERE 3.0 is designed for compatible WP 48 XACT Closed Cartridge Enduro forks used on KTM and Husqvarna motorcycles from 2024 through 2027.

Dal Soggio officially classifies this version as:

WP 48 XACT CC – KTM / Husqvarna – Enduro – 2024-2027.

This version should not be confused with:

• 1P.SPH.XACT2321EN3.0 – WP 48 XACT 2021-2023 Enduro from MX fork;
• 1P.SPH.XACT2125MX3.0 – WP 48 XACT 2021-2025 MX;
• 1P.SPH.XACT-CCMX3.0 – WP 48 XACT CC 2024-2025 MX for US models.

Compatibility is determined primarily by the actual WP 48 XACT Closed Cartridge Enduro fork platform, so the fork fitted to the motorcycle should always be verified before ordering or installation.

Hydraulic System & Performance

SPHERE 3.0 replaces the original fork damping internals with a sealed and pressurized hydraulic cartridge engineered to provide increased precision and sensitivity.

The redesigned bladder helps improve hydraulic responsiveness and cartridge bleeding accuracy.

The 36 mm compression piston increases the working diameter compared with the previous 28 mm design, contributing to a more linear hydraulic response throughout the stroke.

The separated High-Speed and Low-Speed Compression circuits allow the suspension technician to tune slower chassis movements independently from faster suspension events.

With Direct Flow Technology, oil reaches the compression piston directly rather than passing through the previous Z-shaped internal routing, reducing hydraulic restriction and cartridge stress.

Quick Install System

This SPHERE 3.0 version incorporates Dal Soggio’s Quick Install System for the WP XACT 2024+ platform.

With this design, it is no longer necessary to remove the inner fork tube from the axle lug in order to install the cartridge on compatible WP XACT forks.

This simplifies the mechanical installation process while retaining the full SPHERE 3.0 hydraulic architecture.

Professional installation remains recommended because correct cartridge bleeding, suspension setup, spring selection, and damping adjustment are critical to performance and safety.

Enduro Application

This SPHERE 3.0 version is specifically configured for modern KTM and Husqvarna Enduro motorcycles equipped with the WP 48 XACT Closed Cartridge fork.

The cartridge is designed to improve front-wheel feedback and hydraulic control over:

• roots and rocks;
• ruts and technical terrain;
• braking bumps;
• loose and low-grip surfaces;
• square-edge impacts;
• Hard Enduro obstacles;
• fast special tests;
• repeated high-load suspension events.

The independent compression circuits allow slower chassis movements to be tuned separately from faster impacts.

Oil & Service

Dal Soggio specifies CUBE Fork Oil 5W for use inside the SPHERE hydraulic cartridge.

Correct oil quantity, cartridge bleeding, spring setup, damping adjustment, and chassis balance are essential for proper suspension performance.

Professional installation and setup by a qualified off-road suspension specialist are strongly recommended.

Installation Note

Before installation, confirm:

• correct WP 48 XACT Closed Cartridge Enduro fork;
• compatible KTM or Husqvarna application;
• model year between 2024 and 2027;
• correct Enduro configuration;
• correct Dal Soggio SKU 1P.SPH.XACT-CCEN3.0.

The Quick Install System simplifies installation, but the final suspension setup should still be performed according to rider weight, skill level, riding style, terrain, and motorcycle configuration.